Offset Printing Plate Single Layer UV-CTP Plate
EcooGraphix CTCP Plate can be used for long runs high grade commercial and newspaper printing. Unique production technology and high quality raw materials make the plate gain high photosensitive speed, good half-tone dot reproduction and stable performance.
- Kiire kohaletoimetamine
- Kvaliteedi tagamine
- 24/7 klienditeenindus
Toote tutvustus
Offset Printing Plate Single Layer UV-CTP Plate
Model: Ecoo-CTCP-ES
|
|
|
|
|
|
|
|
|
|
|
Single-layer system ,IR sensitive, positive acting |
|
|
{{0}}.15,0.20,0.25,0.30,0.40(mm) |
|
|
Maximum width 1280mm |
|
|
Unbaked:80,000 to 100,000 impressions Küpsetatud: Üle 100,000 näitamised |
|
|
|
|
|
50-70 mj/cm² |
|
|
400-430 nm - UV Laser |
|
|
2-99% at 200 LPI |
|
|
405nm |
|
|
|
|
|
|
|
|
|
|
|
23 degree +/-2 degree |
|
|
25-30 sec |
|
|
0.80-1.20 m/min |
|
|
|
|
|
12 months under recommended storage |
|
|
|
|
|
|
Plaat tüüp |
-V |
|
|
Negative-working, low-chemical violet plate, also can work as normal violet plate |
|
|
|
|
|
|
|
|
{{0}}.20/0.25/0.30mm |
|
Plate-setter |
Existing mainstream 405nm violet plate-setter, Krause/ECRM/Highwater/Escher-Grad/Dotline |
|
|
Existing conventional violet processors and low-chemical violet processors. |
|
|
FUJI LP. DWS. Agfa PL. 10. IMAF NEGA 910; PVD gum |
|
|
Preheat temp setting 90-100 degree (plate surface temp) For FUJI LP-DWS: Developer temperature 25-26 degree /Dwell time 16-17 seconds For Agfa PL-10: Developer temperature 24 degree /Dwell time 17 seconds |
|
|
More than 150,000 impressions. |
|
|
70-80 μj/cm² |
|
|
3% to 97% @ 175 lpi under calibration |
|
|
For manual handling and platesetting loading, darkroom conditions with G10 safelight is required. |
|
|
12months under recommended storage conditions |
|
|
Temperature: 18-26 degree Relative humidity: 30-70% RH |
|
|
Environment-friendly------help enterprises to develop |
Kuum tags: ofset printimine plaat üks kiht uv-ctp plaat , Hiina , tarnijad - 2c tootjad , tehas, kohandatud , hind , in laos
